Cable Drum Handling Equipment / 30 Tonne Drum Stand
Design Features
| Robust Design | Capable of heavy-duty operation in all environments |
| Low Maintenance | All sealed long life roller bearings |
| Fully Adjustable | Capable of heavy-duty operation in all environments |
| Rapid Spindle Setup | Using an aligning bar the spindle can be easily inserted into the drums. The removable bearing assembly is simply slid onto the shaft and located using one pin. |
| Rapid Levelling | Fast levelling using the adjustable jacklegs |
| Braking | Hand Pump operated heavy-duty disc caliper brakes provide line tension and guard against overrun. The braking force can be simply adjusted by turning a twist knob. |
| Driven Option | The design has allowed for the future addition of a drive motor assembly |
| 30 Tonne Option | Using a 120mm dia. spindle the design allows for a 30 tonne cable reel (up to 2550 x dia 4570) to be mounted (the bearings etc fit both the 95 and 120 spindles). |
Specification
| Parameter | Specification | Details |
| Max Cable Drum Weight | 30,000 kg (66,150 lbs) 24,500kg (54,022 lbs) |
Using ∅ 120 Spindle Using ∅ 95 Spindle |
| Max Cable Drum Width | 2550mm (8.4') | |
| Max Cable Drum Diameter | ∅ 4270mm (14') | |
| Min Cable Drum Spindle Hole | ∅ 120mm – 30T (4.9"") ∅ 95mm – 24.5T (3.75"") |
Limited by the spindle shaft diameters |
| Spindle Shaft Dia | ∅ 95mm (3.75") ∅ 100mm (3.94") |
High Tensile Steel AISI 4140 (Q & T) |
| Overall Dimensions | 3232 b x 3563 w x 3060 h | |
| Spindle & Bearings Weight | 460 kg | |
| Removable Bearing Weight | 78 kg | |
| Drum Frame Weight | 900kg | |
| Total Net Weight | 1360 kg | |
| Max Braking Force | 5kN @ Dia 2000mm (510kg) | Hand Pump operated Twin Hydraulic Disc Calipers – Adjustable braking force. |
Parts Books & Operating Instructions
The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.
Change in Specification
Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its' representatives.
Warranty
12 months parts and labour in accordance with guarantee and sales conditions.