Products Cable Pushers 20kN Side Mount

20kN Side Mount

20kN Side Mount

Product Overview

Description

The 20kN side-mount version has been designed to allow cable to be lifted in from one side. This design has the advantage of being more compact when used in restricted areas such as a trench. It is easier to lift heavy cable into the side of the pusher than it is to lift it over the pusher and into the top. The hydraulic power unit includes the control valving and is positioned remotely, generally on the embankment above the trench.

Parts Books & Operating Instructions

The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.

Change in Specification

Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.

Warranty

12 months parts and labour in accordance with guarantee and sales conditions.

360 view

0%

    Hydraulic Powerback

    Diesel Engine Kubota D902 – 15 kW @ 3600 rpm
    Fuel Tank Capacity 40 L
    Engine Oil Shell Rimula
    Hydraulic Oil Castrol Hyspin AWH 46
    Hydraulic Fluid Reservoir Capacity 90 Litres
    Run time/tank 8 -9 hrs dependant on workload
    Hydraulic Load Sense Piston Pump 25 L/min
    Maximum System Pressure 240 bar (3500 psi)
    Hydraulic Power unit Mass 482 kg

    Cable Pusher

    Frame Footprint Fits into 730 mm trench
    Refer to attached drawing
    Cable Pusher Unit Overall Dimensions (LxWxH) 1620mm x 650mm x 1070mm
    Push or Pull Machine is capable of pushing, pulling or pushing and pulling.
    Clamping pressure User adjustable. Clamping pressure and pull/push force displayed on gauges.
    Maximum Cable Push Force (at reduced line speed) 20kN (2000kg)
    Maximum Line Speed (at reduced push force) 25 m/min
    Line cable speed and distance display On pendant
    Capstan Pull Capstan enables polypropylene rope to be winched
    Maximum Capstan Winch Line Pull Force 16 kN (1600 kg)
    Maximum Capstan Winch Line Pull Speed 23 m/min
    Adjustable Jaws, Cable Capacity. 50 to 140 mm cables
    Cable Pusher Mass 420 kg
    • Capacity increased to suit 180mm cable diameter
    • Electric driven hydraulic power pack (view image)
    • Capacity decreased to 27 – 140mm cable diameter
    • Radio control (view image)
    • CE Certification (view image)
    • Cable Bender:
      The cable bender has been designed to straighten the ends of heavy cables before putting them through the cable pusher or during the joining process. It is of lightweight aluminium construction, hand-pump operated by a single acting hydraulic cylinder. The cable bender can handle cable from 50-160mm diameter (view image).

    Want to know more?

    Give our team a call at (07) 5594 9844 or Send Your Enquiry Today.