1.5T Drum Stand
This drum stand has been designed specifically for ABC Cable and other types of cable with similar drum sizes. The drum stand is supplied with hot dip galvanized frame and 54mm steel spindle. The spindles are provided with a disc brake as standard. Spindles rotate on sealed bearings which are maintenance free. Drum stands are provided with four lifting points. In addition, they are provided with forklift tine apertures making it possible to lift the drum stand from any side with a forklift. These drum stands can be provided with a wide range of options including power rotation, separate power pack. Drum stands can be provided with special link pins that will connect multiple drum stands together.
Maximum drum diameter: 1600mm
Maximum drum width: 950mm
Maximum drum weight: 1.5 Tonne
Minimum drum spindle bore: 54mm
Disc Brake: Manual control with capacity 200kg at 1000mm diameter
Parts Books & Operating Instructions
The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information and risk assessment. Additional copies are available upon request at nominal cost.
Fully enclosed airconditioned operator’s cab can be supplied as an option.
Change in Specification
Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.
12 months parts and labour in accordance with guarantee and sales conditions.
- Linking pin assembly (pair)
- Lightweight overhead roller guide assembly (1300mm drum diameter)
- Lightweight overhead roller guide assembly (1600mm drum diameter)
- Hydraulic spindle brake kit, hand pump and pressure gauge (view example)
- Hydraulic drum drive x 1 with 6 HP petrol engine and drive motor (view example)
- Lifting beam and chain set to suit drums weighing 1.5 Tonne (WLL 1.6T)
- Hydraulic drum drive x 1 with 7 HP diesel engine & drive motor
- Disk brake with calibre system capacity of 450kg at 1000mm diameter (view example)