Products Drum Stands 6-Tonne Drum Stand

6-Tonne Drum Stand

6-Tonne Drum Stand

Description

Fixed base drum stand is for use inside a workshop and the frame is bolted to the floor. Large diameter drums can be located in this drum stand system with the aid of a solid spindle.

Specification

Maximum diameter of drum: 2800mm
Maximum width of drum: 1500mm
Spindle diameter: 95mm
Maximum weight of drum: 6000kg

Parts Books & Operating Instructions

The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.

Change in Specification

Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.

Warranty

12 months parts and labour in accordance with guarantee and sales conditions.

Option 1
(view image)
Single 6 Tonne drum stand assembly
Including
– Stainless steel disc brake assembly, 200 kg tension.
– 95mm spindle assembly,
– Integral diesel/hydraulic power pack and valving
– 500 kg line pull drum rotator assembly.
Option 2
(view image)
Single 6 Tonne drum stand assembly
Including
– Stainless steel disc brake assembly, 200 kg tension.
– 95mm spindle assembly,
– Integral /diesel/hydraulic power pack and valving
– 500 kg line pull drum rotator assembly.
– Fairlead control system.
Excluding
– Fairlead framework and mechanismSuitable for use with intermediate frame and fairlead system as per option 8.
Excluding
– Diesel/hydraulic power pack
Option 3
(view image)
Single 6 Tonne drum stand assembly
Including
– Stainless steel disc brake assembly, 200 kg tension.
– 95mm spindle assembly,
– 500 kg line pull drum rotator assembly.
– Hydraulic control valvingExcluding
– Diesel/hydraulic power packSuitable for use with truck PTO drive or remote diesel/hydraulic power unit as per Option 5.
Option 4
(view image)
Manufacture remote skid mounted diesel/hydraulic power unit suitable to drive ONE Single 6 Tonne drum stand assembly. Typically as per option 4.
– Excludes hydraulic control valving
– Includes hose reels
Option 5
Manufacture one intermediate subframe to support TWO non powered drum stands Typically option 1.
(Excluding drum stands )
Option 6
Manufacture one intermediate subframe to support TWO powered drum stands. Typically supporting one unit as per option 3 and one unit as per option 4.
(Excluding drum stands)
Option 7
Manufacture one intermediate subframe to support TWO powered drum stands complete with fairlead assembly. Typically one unit as per option 3 and one unit as per option 4.
(Excluding drum stands)
Option 8
(view image)
Manufacture one intermediate subframe to support THREE non powered drum stands. Typically three units as per option 1. (Excluding drum stands)
Option 9
Manufacture heavy-duty overhead support roller. Maximum cable capacity 100mm diameter.
Option 10
Manufacture light duty overhead support roller. Maximum cable capacity 40mm diameter.
Option 11
Spreader bar and chain assembly for lifting drums in and out of stand
Option 12
Additional 3000 kg spindle
Option 13
Complete 3000 kg spindle and brake assembly
Option 14
Hydraulic hand-pump assembly for greater brake control.
Option 15
1000 kg line pull drum rotator assembly.
Option 16
(view image)
Upgrade stainless steel brake spindle assembly from 200 kg tension to 900 kg tension
Option 17
Upgrade 500 kg line pull (rotator) to 1000 kg line pull.
Option 18
(view image)
Intermediate Frame Lifting Attachment
Option 19
(view image)
3mm Aluminium checker plate flooring put on the base of Drum Stands – Options 1, 2, 3 and 4
Option 20
(view image)
Set of fold-down decking and suitable barrier system to suit 3-Drum intermediate stand – Option No. 9
Option 21
3mm checker plate flooring for 3-Drum intermediate stand – Option No. 9

Want to know more?

Give our team a call at (07) 5594 9844 or Send Your Enquiry Today.