Products Cable Pushers 50kN Dual Side Mount

50kN Dual Side Mount

50kN Dual Side Mount

Product Overview


The Dual 50kN side-mount version has been designed to allow cable to be lifted in from one side. This design has the advantage of being more compact when used in restricted areas such as a trench. It is easier to lift heavy cable into the side of the pusher than it is to lift it over the pusher and into the top. The hydraulic power unit includes the control valving and is positioned remotely, generally on the embankment above the trench.

Supplied with 2 hydraulic power packs that can be operated to gather to give 49kN push/pull for 1 or as 2 single units.

Parts Books & Operating Instructions

The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.

Change in Specification

Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.


12 months parts and labour in accordance with guarantee and sales conditions.

Hydraulic Powerpack

Diesel Engine Kubota D1105-T – 17.7 kW @ 2600 rpm
Fuel Tank Capacity 55 L
Engine Oil Shell Rimula
Hydraulic Oil Castrol Hyspin AWH 46
Hydraulic Fluid Reservoir Capacity 90 Litres
Hydraulic Load Sense Piston Pump 16 cm3/REV
Maximum System Pressure 240 bar (3500 psi)
Hydraulic Power unit Mass 700 kg

Cable Pusher

Frame Footprint Fits into 730 mm trench
Refer to attached drawing
Cable Pusher Unit Overall Dimensions (LxWxH) 1950mm x 600mm x 1080mm
Push or Pull Machine is capable of pushing, pulling or pushing and pulling.
Clamping pressure User adjustable. Clamping pressure and pull/push force displayed on gauges.
Maximum Cable Push Force (at reduced line speed) 0-24.5 kN (2500kg)
Maximum Line Speed (at reduced push force) 0-17 m/min
Line cable speed and distance display On pendant
Capstan Pull Capstan enables polypropylene rope to be winched
Adjustable Jaws, Cable Capacity. 50 to 200 mm cables
Cable Pusher Mass 620 kg
Synchroniser 2 power packs mounted overall dimensions (LxWxH) 3000mm x 2300mm x 1260mm
Maximum cable push force 49kN (5000 KG)
Mass with 2 hydraulic power packs mounted 2050 kg
Mass with 2 hydraulic power packs mounted 2050 kg (view image)
  • Electric driven hydraulic power pack (view image)
  • Capacity decreased to 27 – 140mm cable diameter
  • Radio control (view image)
  • CE Certification (view image)
  • Cable Bender:
    The cable bender has been designed to straighten the ends of heavy cables before putting them through the cable pusher or during the joining process. It is of lightweight aluminium construction, hand-pump operated by a single acting hydraulic cylinder. The cable bender can handle cable from 50-160mm diameter (view image).

Want to know more?

Give our team a call at (07) 5594 9844 or Send Your Enquiry Today.