2kN Fibre Optic Skid Mount with Petrol Engine
The2kN Fibre Optic winch is used for pulling fibre optic cable by wrapping the cable directly onto a large diameter capstan. The capstan diameter is approx. 1400mm and is of suitable diameter not to damage the fibre optic cable during the pulling process. Fibre optic winches can be set up to a maximum line pull of 2kN. However, they can be adjusted via the control console to pull line force of anything less than 2kN and have a constant line pull throughout the pulling process.
Skid-mount winch assembly is supplied with operator controls on the side of the unit and a separate food-operated control for stop and forward/reverse of the wheel rotation. This design is a refinement of previous designs. After the unit has been set up a single operator can control the unit – this is a labour saving device.
Change in Specification
Specification provided is approximate, it can be confirmed on the quote if requested.
Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.
|Rated Line Pull Capacity||Capstan Diameter||Max Line Speed||Pressure Compensator Setting|
|2 kN||1300 mm||60 m/ min||172 bar|
|4 kN||650 mm||30 m/ min||172 bar|
|7 kN||325 mm||15 m/min||172 bar|
|Capstan winch overall Length||2030 mm|
|Capstan winch overall width||1360 mm|
|Capstan winch overall height||740 mm|
|Capstan winch overall mass||415 kg|
|Base frame length||1400 mm|
|Base frame width||900 mm|
|Fuel tank capacity||4.1 litres|
|System pressure||172 bar|
|Maximum flow||7.2 L/min|
|Hydraulic oil||Castrol AWS 46|
|Hydraulic oil tank capacity||35 litre|
|Diameter of capstan wheel||1300mm|
|Finished in powdercoat interpon safety Yellow||Standard|
|Foot control (view image)||Standard|