Description

The 5kN Fibre Optic winch is used for pulling fibre optic cable by wrapping the cable directly onto a large diameter capstan. The capstan diameter is approx. 1400mm and is of suitable diameter not to damage the fibre optic cable during the pulling process. Fibre optic winches can be set up to a maximum line pull of 5kN. However, they can be adjusted via the control console to pull line force of anything less than 5kN and have a constant line pull throughout the pulling process. Sometimes these winches can be set e.g. to 2kN and locked in this maximum line pull mode to meet the requirements of specific cable companies such as Telstra and Optus.

Skid-mount winch assembly is supplied with operator controls on the side of the unit and a separate food-operated control for stop and forward/reverse of the wheel rotation. This design is a refinement of previous designs. After the unit has been set up a single operator can control the unit – this is a labour saving device.

Change in Specification

Specification provided is approximate, it can be confirmed on the quote if requested.

Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.