Products Winches 5kN Skid-mount 1.5T Drum Stand Recovery Winch including Fairlead

5kN Skid-mount 1.5T Drum Stand Recovery Winch including Fairlead

5kN Skid-mount 1.5T Drum Stand Recovery Winch including Fairlead

360 view


    Product Overview


    This Winch has been designed for hauling overhead cables directly onto a split drum using the old cable to pull in the new conductor. The winch is provided with a fairlead to layer the cable onto the split drum, fairlead is controlled via a hydraulic cylinder. The winch speed and fairlead speed can be pre-set.

    The winch is self-contained with built in diesel hydraulic power pack and operator guard. The skid mount winch is provided with forklift tyne pockets.
    There are also a number of ties down points provided, making it suitable to be carried by a small vehicle or box trailer.

    The split drum can be removed and be replaced with the drum up to 1600mm diameter by 950mm wide, weighing up to 1500kgs

    The drum stand winch is provided with a manual clutch making it possible to free wheel the drum. The unit is also provided with a stainless steel disc type drag brake, making it suitable for pulling cable directly off the drum.

    Parts Books & Operating Instructions

    The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.

    Change in Specification

    Specification provided is approximate, it can be confirmed on the quote if requested.

    Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.


    12 months parts and labour in accordance with guarantee and sales conditions.

    Overall length 1780 mm
    Overall width 1920 mm
    Overall height (loaded) 2110 mm
    Tare weight (approx.) 638 kg
    Diameter 810 mm
    Width 830 mm
    Barrell Diameter 250 mm
    Max Cable Weight 750 kg
    Maximum diameter 1600 mm
    Maximum width 950 mm
    Maximum weight 1.5 Tonne
    Disk Caliper MICO 515 series with mechanical actuation
    Brake Disk 395 mm Stainless Steel
    Brake Capacity 800kg @ 250 mm diameter
    Rated Brake Capacity 200kg @ 1000 mm diameter
    Line Pull Max 5kN @ 250 mm diameter
    Free Wheeling By Manual Clutch
    Engine Kohler Air Cooled Diesel 8.8kW
    Full Tank 4 Liters
    Hydraulic Oil Reservoir 58 Liters
    Noise Level 95 dBA @ 2200 rpm

    Want to know more?

    Give our team a call at (07) 5594 9844 or Send Your Enquiry Today.