60kN Skid-Mounted Recovery Winch
This winch series is designed for general cable hauling and recovery work. These winches are fitted with hydraulic loading holding valves and failsafe brakes enabling them to be safely used for hoisting. Winches have variable line speeds with high speed selection for fast retrieval and payout.
The winches are provided with an operator’s enclosure and operator’s seat. As standard, these winches are supplied with an Archimedes screw and fairlead arrangement to automatically layer rope evenly on the drum. The Archimedes screw is manufactured from stainless steel to maximise corrosion resistance.
Winches are provided with hot dip galvanised skid-mount that connects the power pack to the winch assembly. Skid-mounts come in two versions – one with container locks with standard 20 foot configuration and the other is of similar configuration but more compact design for weight saving.
The skid is provided with lift points at each corner and cross tubes for lifting with a forklift.
Parts Books & Operating Instructions
The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.
Change in Specification
Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.
12 months parts and labour in accordance with guarantee and sales conditions.
|Winch Line pull at top layer||60kN|
|Rope Capacity||20mm x 960 metres(wire rope)
Rope not included
|Winch Speed: Normal||13 m/minute @ 60kN – 6000kg|
|Winch Speed: high speed||20 m/minute @ 40kN – 4000kg|
|Engine type||Water Cooled Diesel – electric start|
|Hydraulic oil reservoir||140 Litres with 12 Volt oil cooler|
|Diesel tank||54 litres|
|Full Drum||850mm – 60kN (6000kg)|
|Empty Drum||60kN (6000kg)|
|Tension Line pull||60kN (6000kg) constant at low speed|
|Line Speed||2-Speed auto change via hydraulic motor|
|– High speed full drum||20 m/minute @ 40kN – 4000kg|
|– Low Speed full drum||11.5 m/minute @ 60kN – 6000kg|
- Side capstan (view image)
- Distance display
- Tension display
- Programmable display screen with data logger (view video)
- 20’ skid base with container locks with operator’s enclosure
- Compact skip base with operator’s enclosure
- Lighting set (view image) which includes:
2 x work lights
1 x enclosure lamp
1 x amber rotating light with guard
- Bunded base
- Lifting options