ABC 4-Drum Cable Trailer
The 4-Drum ABC (Aerial Bundle Cable) Trailer is supplied with diesel engine to drive the hydraulic power unit and has the capacity to carry 4 drums 1200mm in diameter with a maximum width of 900mm. If there are empty drums between the supports, drums of up to 1600mm diameter can be installed. The trailer is supplied with separate drum modules and main frame. Each of the four drum supports is an individual unit which may be detached from the trailer frame.
Each drum stand is fitted with a removable centre drum spindle and disc brake assembly which enables the operational crew to establish a line pull of up to 200kgs at 1000mm diameter.
The hydraulic power unit enables the operational crew to reel the cable in (or pay out fully controlled) via a hydraulic motor attached to all four drum-stand spindles. It is possible to drive all 4 drum stand spindles simultaneously.
All trailers and modules are fully hot dip galvanised. As a further alternative, this 4-Drum unit can be offered in skid mount form.
- Max Drum Mass: 1.3 Tonne
- Max Drum Diameter: 1200 mm
- Max Drum Width: 900 mm
- Standard Spindle Diameter: 54 mm
- Overall Length: 7170 mm
- Overall Width: 1820 mm
- Height Loaded (with roller guide stand): 2650 mm
- Height Unladen (with roller guide stand): 2650 mm
- Mass Unladen: Approx. 2500 kg
- Mass Fully Laden (max): 8000 kg
- Standard Trailer Brake Type (S-Cam air in accordance with ADR62): Air
Parts Books & Operating Instructions
The equipment is supplied with one copy of an operation, parts and maintenance manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.
Change in Specification
Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.
Delivery on these units would be approx. 12 weeks from receipt of written confirmation of order and receipt of deposit. Firm delivery dates will be confirmed on acceptance of order.
Refer to Redmond Gary’s standard 12 month guarantee and sales conditions available on request.
- Trailer frame finished in hot dip galvanising
- Operational controls housed in cabinet located on kerb side of the trailer
- Engine Cabinet manufactured from 1.6mm zinc anneal sheeting finished with powder coating – all seams and edges are sandblasted, primed prior to powder coating
- All tanks and hydraulic cylinders finished in 2-Pack enamel
- ADR approved single axle with Air Brakes
- Spider wheels with split rims – 8.25 x 15 tyres
- Hydraulic Front Jackleg/Stabiliser
- Hydraulic Rear Jackleg/Stabilisers
- Tow Eye Type – 75mm Ring Type Swivel Tow Coupling
- Coupling Height – 600 mm
- Pinlock Endlink Chain Ends
- 10 hour Fuel Tank
- LED Lights
- Safety and Operational Signage – Screen Printed Anodised Aluminium
- Final Coat Finish. Powder Coating and 2 pack Enamel. Yellow, Interpon, Safety Yellow, Product Code ME096A
- All electrics 12 / 24 Volt
- One set of Operational Manuals
- Additional removable drum stand module complete with removable 54mm spindle and disc brake assembly (view image)
- One Light weight overhead roller guide stand with one set rollers – For single cable guide (view image)
- Two Light weight overhead roller guide stands. (One stand with two sets rollers. One stand with one set of rollers.) (view image)
- Three Light weight overhead roller guide stands. (One stand with two sets rollers, Two stands with one set of rollers each) (view image)
- Rotating amber light
- Set of 4 wheel Chocks Trellborg, Qld Rubber and holder
- Emergency stop (engine)
- Set of 3 Emergency triangle (Navara ME41) with high visibility vest
- Spare wheel
- Coupling Height – 550 mm
- Coupling Height – 650 mm
- Coupling Height – 700 mm
- Tow Eye Type Ring Type 75mm Fixed
- Tow Eye Type PIN Type 50mm
- Tow Eye Type PIN Type 40mm