Products Winches Cable Puller Cutter Trailer

Cable Puller Cutter Trailer

Cable Puller Cutter Trailer

Product Overview

Description

This unit has been specifically designed to pull cable out of conduits or the ground to be scrapped. The trailer mounted machine consists of a 20kN Cable Pusher, Automatic Cable Cutter and cable chutes to direct cable off-cuts into a tip truck or similar vehicle.

The Cable Pusher Cutter Trailer must be attached to the towing vehicle when in operation. The two rear jacklegs must be deployed and the trailer levelled. The unit is controlled by a pendant attached to the kerb side of the trailer. The Cable Pusher Cutter Trailer will pull the cable from the manhole through the pusher and cut the cable into lengths or approximately 1 meter. The cable off-cuts will travel along the chute and into the towing vehicle (tip truck or similar).

The Cable Pusher Cutter Trailer is fully self-contained with its own diesel power unit and all equipment needed to do the cable scrapping job.

Change in Specification

Specification provided is approximate, it can be confirmed on the quote if requested.

Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its’ representatives.

Warranty

12 months parts and labour in accordance with guarantee and sales conditions.

Hydraulic Powerpack

Diesel Engine Kubota D902 – 15 kW @ 3600 rpm
Fuel Tank Capacity 40 L
Engine Oil Shell Rimula
Hydraulic Oil Castrol Hyspin AWH 46
Hydraulic Fluid Reservoir Capacity 90 Litres
Run time/tank 8 -9 hrs dependant on workload
Hydraulic Load Sense Piston Pump 25 L/min
Maximum System Pressure 240 bar (3500 psi)

Cable Pusher

Frame Footprint  Fits into 730 mm trench Refer to attached drawing
Cable Pusher Unit Overall Dimensions (LxWxH) 1620mm x 650mm x 1070mm
Push or Pull Machine is capable of pushing, pulling or pushing and pulling.
Clamping pressure User adjustable. Clamping pressure and pull/push force displayed on gauges.
Maximum Cable Push Force (at reduced line speed) 20kN (2000kg)
Maximum Line Speed (at reduced push force) 25 m/min
Line cable speed and distance display On pendant
Capstan Pull Capstan enables polypropylene rope to be winched
Maximum Capstan Winch Line Pull Force 16 kN (1600 kg)
Maximum Capstan Winch Line Pull Speed 23 m/min
Adjustable Jaws, Cable Capacity. 50 to 180 mm cables

Trailer

ATM 2500kg
Tare Mass (approx.) 2050kg
Payload (approx.) 450kg
Overall Length 5000mm
Overall Width 2480mm
Overall Height 2200mm
Trailer Brakes Electric
Front and Rear Jacklegs Manual
  • Frame Footprint Fits into 730mm wide trench
  • Cable Pusher Unit Overall Dimensions (LxWxH) 1650mm x 900mm x 600mm
  • Power Unit Overall Dimensions (LxWxH) 1700mm x 800mm x 1100mm
  • Machine is capable of pushing, pulling or pushing and pulling.
  • User adjustable Clamping pressure. Clamping pressure and pull/push force displayed on gauges.
  • Line cable speed and distance display on Power Unit Cabinet
  • Pull Capstan enables polypropylene rope to be winched
  • Adjustable Jaws, Cable Capacity. 50 to 180mm cables
  • Main Frame components are hot dipped galvanised.
  • Final coat finish – Powder Coating and 2 pack enamel (Interpon, Safety Yellow – Product code ME096A).
  • Water cooled Diesel Engine, Kubota. – Diesel engine model only.
  • 40 litre Fuel Tank – Approx 8-9hrs running time (depending on engine load) – Diesel engine model only.
  • One(1) set of Operation Manuals

For options available please contact one of our sales team.

Want to know more?

Give our team a call at (07) 5594 9844 or Send Your Enquiry Today.